manualshive.com logo in svg

Siemens 300 Series, User Manual, Page: 183 / 197

Share
Download
Siemens 300 Series User Manual Download Page 183

 ROLMphone Differences on Release 9006i

C–9

• Pilot Hunt Group lets your CBX system 

administrator set up a group of phones under a pilot 
extension. A call to that extension will move from 
one phone to another in the group until the call is 
answered or the caller hangs up.

• Private Hold lets you place a call on hold so that it 

can only be retrieved from your phone, even if that 
line appears on another phone.

• The Program key lets you set up several other 

features such as Repertory Dialing (Repdial), 
Station Speed Dialing, and Variable Forwarding.

• Speaker Call Rejection lets you temporarily block 

incoming speaker calls.

• Station Hunt Group lets you use your phone to set 

up a group of phones so that an incoming call will 
move from one phone to another until it is answered 
or the caller hangs up.

• System Hold lets you move a call to a system slot. 

The call on system hold can then be retrieved at any 
extension by pressing the System Hold 
(SYSHOLD) key and dialing the number of the 
system slot.

• Trace Call lets you record on a system printout the 

number of a caller.

Summary of Contents for 300 Series






































































































































































































Reviews:

No comments