manualshive.com logo in svg

Siemens 300 Series, User Manual, Page: 121 / 197

Share
Download
Siemens 300 Series User Manual Download Page 121

 Moving Calls

5–5

5. Movin

g

 Calls

To forward 
internal and 
external calls 
under all 
conditions

➩

Get a dial tone.

➩

Press the FORWARD key.

➩

Dial the extension or dial 9 and the outside 
number, to which you want your calls to be 
forwarded. Your primary line key status light 
flickers and the FORWARD status light turns 
on to indicate that Variable Forwarding is 
active for your extension.

➩

Hang up.

Note

For this method of forwarding to work, Fixed 
Forwarding must not be active.

To set up 
Variable 
Forwarding 
options on a 
display phone

➩

Press the PROGRAM key. The PROGRAM 
status light turns on. PRESS FEATURE KEY 
OR DIAL CODE is displayed.

➩

Press the FORWARD key. If your extension 
has been set up for Variable Forwarding, the 
first Variable Forwarding option is displayed, 
as shown under the following step.

Note

On CBX Release 9006.1 only, SYSTEM FORWARD 
is displayed if Fixed Forwarding has been set up for 
your extension. It is followed by either ON or OFF, 
depending on whether Fixed Forwarding is currently 
active. If Fixed Forwarding is on and you press the 
CLEAR key, Fixed Forwarding is deactivated. 

Summary of Contents for 300 Series






































































































































































































Reviews:

No comments