manualshive.com logo in svg

Siemens 300 Series, User Manual, Page: 132 / 197

Share
Download
Siemens 300 Series User Manual Download Page 132

5–16

ROLMphone 300/600 User Guide

To place a call 
on system hold 
on a non-display 
phone or a dis-
play phone with-
out a System 
Hold key

➩

Press the TRANSFR key.

You will hear the confirmation tone, followed 
by the dial tone.

➩

Dial * 8.

➩

Dial the number of the slot to which you want 
to assign the call (0 through 9). 0n display 
phones, CALL PARKED IN SLOTand the 
number of the slot to which the call has been as-
signed are displayed.

You will hear the confirmation tone.

➩

Hang up.

➩

Notify the party who will be retrieving the call 
of the assigned slot number.

Note

If you hear a busy tone, press the CONNECT key to 
return to your party. Then try the whole procedure 
again using a different slot number. If you hear a fast 
busy tone, there are no system slots available at this 
time.

To retrieve a call 
on system hold

➩

Get a dial tone.

➩

Press the System Hold (SYSHOLD) key, or dial 
* 8. If you have a display telephone, ENTER 
PARK SLOT NUMBER is displayed.

➩

Dial the number of the system slot.

➩

Begin speaking. If you do not have a speaker-
phone, you must pick up the handset to speak to 
the other party.

Summary of Contents for 300 Series






































































































































































































Reviews:

No comments