manualshive.com logo in svg

Siemens 300 Series, User Manual, Page: 78 / 197

Share
Download
Siemens 300 Series User Manual Download Page 78

3–14

ROLMphone 300/600 User Guide

To clear a DSS 
key on a display 
telephone

➩

Press the PROGRAM key. The PROGRAM 
status light turns on, and PRESS FEATURE 
KEY OR DIAL CODE is displayed.

➩

Press the DSS (D-) key you want to clear. 
DIRECT STATION SELECT is displayed, 
followed by the stored extension.

➩

Before NEW NUMBER? is displayed, press the 
CLEAR key. DELETED is displayed.

➩

If you want to clear another D-key, repeat the 
previous two steps.

➩

To end setup, press the PROGRAM key. The 
PROGRAM status light turns off.

➩

On your faceplate, erase the label next to each 
D- key you have cleared.

Note

You cannot clear a DSS key on a non-display 
telephone or any telephone without a Clear key, 
though you can set it up to dial a different extension.

To dial a DSS 
extension

➩

Press the DSS (D-) key for that extension. The 
other party will hear a triple beep.

If you press a DSS key while you are on a call, 
the CBX will place the first party on 
consultation hold before dialing the DSS 
extension. To reconnect to the first party, press 
the CONNECT key. (See “Consultation” on 
page 3–11.)

Note

A DSS call overrides Forwarding and both Station 
and Pilot Hunting. (See “Forwarding” on page 5–3 
and “Hunt Groups” on page 7–7.)

Summary of Contents for 300 Series






































































































































































































Reviews:

No comments