manualshive.com logo in svg

Siemens 300 Series, User Manual, Page: 85 / 197

Share
Download
Siemens 300 Series User Manual Download Page 85

 Making Calls

3–21

3. Making

 C

alls

Mailbox Reminder Message

When you call an extension that is busy or does not 
answer, the Mailbox Reminder Message feature lets 
you leave a reminder message, to have the other party 
call you back. The extension you are calling must 
have a mailbox. (See “Using Your Mailbox” on page 
2–23.)

For information on how to display and respond to re-
minder messages, see “Mailbox Reminder Messages 
and Notifications” on page 4–3.

To leave a 
reminder 
message

➩

After receiving a busy tone or getting no an-
swer, press the MAILBOX key or dial # * 1.

You will hear the confirmation tone. If you 
have a display telephone, WILL CALL BACK 
is displayed.

➩

Hang up. The other party’s MAILBOX status 
light turns on. If the other party has a display 
telephone, the system will also leave a reminder 
message providing your name and the date and 
time of your call.

To delete a 
reminder 
message you 
have left on 
another 
telephone

➩

Get a dial tone.

➩

Dial # * 8.

You will hear the confirmation tone, followed 
by the internal dial tone.

➩

Dial the extension at which you left the re-
minder message.

You will hear the confirmation tone.

➩

Hang up.

Summary of Contents for 300 Series






































































































































































































Reviews:

No comments