manualshive.com logo in svg

Siemens 300 Series, User Manual, Page: 149 / 197

Share
Download
Siemens 300 Series User Manual Download Page 149

 Managerial Features

7–11

7. M

anager

ial Featu

res

To change your 
station hunt 
destination

➩

Remove your phone from the hunt group, as 
described on page 7–12.

➩

Verify that both the member who is your 
current destination and the one who will 
become your new destination have also 
removed their phones from the group.

➩

Get a dial tone.

➩

Dial # * 9 0.

You will hear the confirmation tone, followed 
by the dial tone. If you have a display phone, 
STATION HUNT is displayed.

➩

Dial the primary extension of the member to 
whom you want to advance calls.

You will hear the confirmation tone. If you 
have a display phone, STATION HUNT and 
your destination are displayed.

➩

Hang up.

➩

Rejoin your hunt group, as described on page 
7–13.

Note

You must remove yourself from the hunt group before 
you can change your station hunt destination.

Summary of Contents for 300 Series






































































































































































































Reviews:

No comments