manualshive.com logo in svg

Siemens 300 Series, User Manual, Page: 119 / 197

Share
Download
Siemens 300 Series User Manual Download Page 119

 Moving Calls

5–3

5. Movin

g

 Calls

Forwarding

Forwarding automatically redirects your incoming 
calls to another extension or an outside number, 
referred to as a forwarding target. The CBX provides 
two types of forwarding: fixed and variable.

Fixed Forwarding

Fixed Forwarding forwards calls to as many as two 
different extensions set up at the CBX. Fixed For-
warding is often used to forward unanswered calls to 
the PhoneMail system or to your company’s message 
center.

Your CBX system administrator can select the 
following conditions under which calls will be
forwarded:

• when your extension is busy

• when your extension rings, but no one answers (for 

a period of time specified at the CBX)

• when your extension is in Do Not Disturb mode

• under any combination of the conditions mentioned 

above

• forward all calls

Your system administrator can also specify that your 
incoming calls from outside numbers be forwarded to 
one extension and those from extensions to another. 
You can cancel Fixed Forwarding to prevent incom-
ing calls from being forwarded, although this is rarely 
necessary.

To cancel Fixed 
Forwarding

➩

Get a dial tone.

➩

Dial # # 9 0.

Listen for the confirmation tone. If you have a 
display telephone, SYSTEM FORWARD OFF 
is displayed.

➩

Hang up.

Summary of Contents for 300 Series






































































































































































































Reviews:

No comments