manualshive.com logo in svg

Siemens 300 Series, User Manual, Page: 95 / 197

Share
Download
Siemens 300 Series User Manual Download Page 95

 Making Calls

3–31

3. Making

 C

alls

One-Way Broadcast Speaker Call

The One-Way Broadcast Speaker Call feature lets you 
make a one-way call to the speakers of up to 40 
phones that are multiple line appearances of the same 
extension. To use this feature, you must be set up for 
it on your CBX.

Note

One-Way Broadcast Speaker Call is only available on 
CBX Release 9006.3 and higher.

To make a one-
way broadcast 
speaker call 

➩

Press the One-Way Broadcast Speaker Call 
(SPKBCST) key.

You will hear the confirmation tone, followed 
by a dial tone.

OR

Get a dial tone and dial # 8 0.

You will hear the confirmation tone, followed 
by a dial tone.

➩

Dial the extension.

You will hear the confirmation tone. The other 
parties will hear a special tone.

➩

Begin speaking. The other party must pick up 
the handset to answer.

If one of the parties you have called lifts his 
handset, a two-way (not speakerphone) 
connection will be established with that party. 
The other parties will be disconnected.

A party you have called can disconnect by 

Summary of Contents for 300 Series






































































































































































































Reviews:

No comments