![background image](http://html.mh-extra.com/html/sick/lector-620/lector-620_online-help-manual_1264275152.webp)
Chapter
5
ONLINE HELP SOPAS
LECTOR®620
152
©
SICK AG · Germany · All rights reserved · Subject to change without notice
8013778/Y269/2013-11-27
Parameters
5.10.13.1.6
Length
If the T
IMER
/T
RACKING
condition is selected under the
parameter, you can use
parameter to enter the duration for which the digital output remains activated.
The unit can be selected in the
parameter.
5.10.13.2 Output/Result 2
The
group contains the parameters for adjusting digital output 2.
5.10.13.2.1
Active
The event that activates the digital output is selected via the
parameter.
• SOPAS
COMMAND
: The output is activated via a command. This allows defined statuses to
be displayed by a connected indicator lamp via a corresponding command from the control
(PLC).
• D
EVICE
READY
: The output is activated as soon as the LECTOR
®
620 is ready for use.
• G
OOD
R
EAD
: The output is activated when the read is successful.
• N
O
R
EAD
: The output is activated when the read is unsuccessful.
• T
EACH
-IN 1 OK: The output is activated when the
MATCH
CODE
T
EACH
-IN 1 has been suc-
cessfully taught in.
• T
EACH
-I
N
1 NOK: The output is activated if the
MATCH
CODE
T
EACH
-IN 1 has not been suc-
cessfully taught in.
• T
EACH
-IN 2 OK: The output is activated when the
MATCH
CODE
T
EACH
-IN 2 has been suc-
cessfully taught in.
• T
EACH
-I
N
2 NOK: The output is activated if the
MATCH
CODE
T
EACH
-IN 2 has not been suc-
cessfully taught in.
• E
XTERNAL
LIGHTING
: External lighting is connected to the output and can be switched on and
off by the device.
• M
ATCH
1
CONDITION
: The output is activated when the code that has been read corresponds
to the M
ATCH
1
CONDITION
match code.
• M
ULTICODES
1
CONDITION
: The output is activated when the number of codes that have been
read corresponds to the number specified by the M
ULTICODES
1
CONDITION
.
• T
EACH
-I
N
1
CONDITION
: The output is activated when the code that has been read corre-
sponds to the T
EACH
-I
N
1
CONDITION
match code.
• T
EACH
-I
N
2
CONDITION
: The output is activated when the code that has been read corre-
sponds to the T
EACH
-I
N
2
CONDITION
match code.
The behavior of the external lighting and the switch type is set under
.
5.10.13.2.2
Function (Off)
parameter is used to select the event for which the digital output is deac-
tivated.
• T
IMER
/T
RACKING
: The output is deactivated after a certain period of time (
• N
EXT
OBJECT
TRIGGER
: The output is deactivated as soon as the next reading gate is opened.