![background image](http://html.mh-extra.com/html/sick/lector-620/lector-620_online-help-manual_1264275155.webp)
ONLINE HELP SOPAS
Chapter
5
LECTOR®620
Parameters
8013778/Y269/2013-11-27
©
SICK AG · Germany · All rights reserved · Subject to change without notice
155
5.10.13.3.2
Function (Off)
parameter is used to select the event for which the digital output is deac-
tivated.
• T
IMER
/T
RACKING
: The output is deactivated after a certain period of time (
• N
EXT
OBJECT
TRIGGER
: The output is deactivated as soon as the next reading gate is opened.
• SOPAS C
OMMAND
: The output is deactivated by a command. As a result, the defined sta-
tuses can be displayed via a connected control lamp as a result of a controller (PLC) com-
mand.
• G
OOD
R
EAD
: The output is deactivated in the event of a successful reading.
• N
O
R
EAD
: The output is deactivated in the event of an unsuccessful reading.
• T
EACH
-
IN
1 S
TART
: The output is deactivated as soon as the processing for teaching in the
M
ATCHCODE
T
EACH
-
IN
1 starts.
• T
EACH
-
IN
2 S
TART
: The output is deactivated as soon as the processing for teaching in the
M
ATCHCODE
T
EACH
-
IN
2 starts.
• C
ONDITION
M
ATCH
1: The output is deactivated if the read code corresponds to the match-
code from C
ONDITION
M
ATCH
1.
• C
ONDITION
M
ULT
C
ODES
1: The output is deactivated if the number of read codes corre-
sponds to the required number from C
ONDITION
M
ULT
C
ODES
1.
• C
ONDITION
T
EACH
I
N
1: The output is deactivated if the read code corresponds to the match-
code from C
ONDITION
T
EACH
I
N
1.
• C
ONDITION
T
EACH
I
N
2: The output is deactivated if the read code corresponds to the match-
code from C
ONDITION
T
EACH
I
N
2.
5.10.13.3.3
Or
You can use the
parameter to choose a second condition for deactivating the digital out-
put.
One of the conditions must be met for the digital output to be deactivated.
• ---: Second condition not selected.
• C
ONDITION
M
ATCH
1: The output is deactivated if the read code corresponds to the match-
code from C
ONDITION
M
ATCH
1.
• C
ONDITION
M
ULT
C
ODES
1: The output is deactivated if the number of read codes corre-
sponds to the required number from C
ONDITION
M
ULT
C
ODES
1.
• C
ONDITION
T
EACH
I
N
1: The output is deactivated if the read code corresponds to the match-
code from C
ONDITION
T
EACH
I
N
1.
• C
ONDITION
T
EACH
I
N
2: The output is deactivated if the read code corresponds to the match-
code from C
ONDITION
T
EACH
I
N
2.
5.10.13.3.4
Logic
The
parameter is used to select the polarity of the digital output.
• N
OT
INVERTED
: On activation, the digital output switches from Low (0) to High (1).
• I
NVERTED
: On activation, the digital output switches from High (1) to Low (0).