EN
Date: 27-05-2019 Version 12.0 Document no.: 5265800
This information is furnished for guidance, and with no guarantee as to its accuracy or completeness; its publication conveys no license under any patent or other right, nor does
the publisher assume liability for any consequence of its use; specifications and availability of goods mentioned in it are subject to change without notice; it is not to be
reproduced in any way, in whole or in part, without the written consent of the publisher.
© Nedap N.V., P.O. Box 103, NL-7140 AC GROENLO, The Netherlands
1.
General
The Invexs 170 reader series is capable of reading
(simultaneously) Nedap, Mifare and DESFire credentials
due to its dual reader technology. The Invexs can read
Mifare, DESFire and Nedap cards, and is equipped with
keypad and / or a display. The Invexs output can be set
to either Wiegand, XS RF modulation or RS485 protocol
(plain or encrypted). Functionality and output are
determined by the configuration of the Invexs reader.
The configuration is defined using the program AEreco,
and deployed by the configuration card or via AEmon.
(More information about configurations can be found in
the Convexs Invexs Installation Manual). Three LEDs
(red, green, blue) and beeper are included (display
version has no LED). Ciphers of the keypad versions light
up after activation, so when not active the ciphers are not visible.
Back panel is available only black (MNK170B).
2.
Dimensions
3.
Mounting Procedure Invexs
For mounting the Invexs, the back plane must be placed on the wall first.
For removing the back plane from the Invexs, unscrew the two screws at
the bottom of the Invexs and push the front cover up . Mount the back
plane using the 4 holes. Connections must be made on the connector on the
Invexs 170 Readers
Mifare Nedap dual technology readers
Quick Install sheet
EN
1
2 3
4
5 6
7
8 9
C
0 E
1
2 3
4
5 6
7
8 9
C
0 E
75.2
52
40
6.8
4.8
20.
3
120
40
170.
5
24.5
1.5
0.5
Dimensions: 171 x 75 x 25 mm.
4 mounting holes available at 52 x 120 mm
Cable outlet: 40 x 40 mm
1
2
3
4
5
6
7
8
9
C
0
E
Unscrew
Push up
01
02
01
02
