Chapter
5
ONLINE HELP SOPAS
LECTOR®620
120
©
SICK AG · Germany · All rights reserved · Subject to change without notice
8013778/Y269/2013-11-27
Parameters
5.9.2.3.3
Hour
If the
parameter is activated, the diagnosis images are sorted by their recording time
and stored in a subfolder with the appropriate time stamp. A new subfolder is created for
each complete hour.
Storing data according to the recording time requires the device time to be set accura-
It makes sense to store data according to the recording time if you have a high volume of
image files.
5.9.2.3.4
Subfolder Good Read / No Read
parameter is activated, the images are stored in two
different subfolders depending on the read result (G
OOD
R
EAD
or N
O
R
EAD
) to enable easier
analysis.
5.9.2.3.5
Good Read / No Read file prefix
Good Read / No Read file prefix
parameter is activated, the images are only given a
name supplement depending on the read result (G
OOD
R
EAD
or N
O
R
EAD
) to enable easier ana-
lysis.
5.9.2.3.6
Image file name
parameter to define the file name for the image files. The
image files are also given a sequential number, and if the
Good Read / No Read file prefix
parameter is activated, a name supplement (G
OOD
R
EAD
or N
O
R
EAD
).
By assigning suitable file names, you can clearly assign the image files (e.g. to a project or
device).
5.10
Network/Interfaces/IOs
Settings for using the CAN bus interface can be made on the
tab.
With the CDF600 connection module, SICK reading devices have a CAN interface that can
be used in the following ways:
• The CAN interface is used to integrate the device into a SICK network. In the SICK net-
work, only SICK reading devices can be networked via CAN bus. This type of device group is
used to scan an object from different perspectives and transmit the reading result to a host.
As far as the host is concerned, the device group functions as an individual device. The ma-
ster/slave or multiplexer/server operating modes are available for the SICK network. Both
operating modes can be combined.
• The reading device can be integrated into a CAN fieldbus system with no further specifica-
tion via CANopen. The SICK reading device operates as a slave under a CANopen client
(PLC) and can communicate with devices from other manufacturers.
The
folder in the project tree contains all parameters for configu-
ring and activating serial interfaces, fieldbus interfaces, digital inputs and outputs, and bee-
pers.
