SICK Lector 620 Online Help Manual Download Page 163

Page: 163 / 166

ONLINE HELP SOPAS

Chapter

LECTOR®620

Service

8013778/Y269/2013-11-27

163

Service

Operating data along with status and version information for diagnostic and analysis purpo-
ses can be retrieved from the

Service

folder.

6.1

Operating data

The data relating to the device, operation, and service and maintenance is combined on the

Operating data

tab.

6.1.1

Device information

The identification data of the LECTOR

620 is indicated via the parameters of the

Device in-

formation

group.

This data is important for service work.

6.1.1.1

Manufacturer

The manufacturer of the LECTOR

620 is indicated in the

Manufacturer

display field.

6.1.1.2

Device type

The device type of the LECTOR

620 is indicated in the

Device type

display field.

6.1.1.3

Software version

The version of the installed firmware is indicated in the

Software version

display field.

6.1.1.4

Order number

The order number of the LECTOR

620 is indicated in the

Order number

display field.

6.1.1.5

Serial number

The serial number of the LECTOR

620 is indicated in the

Serial number

display field.

6.1.2

Operating data

Notes on how to operate the device are displayed under

Operating data

• P

OWER

COUNTER

: Displays how many times the device has been switched on.

• O

PERATING

HOURS

: Displays the total number of device operating hours.

• P

OWER

TIME

: Displays the current operating hours since the last switch-on.

6.1.3

Service information

Service and maintenance data is displayed in the

Service information

group. Maintenance

intervals can be entered.

• L

AST

USER

: User name of the last user to be logged in

• L

AST

CONFIGURATION

: Date and time of the last configuration saved in the device

• L

AST

MAINTENANCE

: Date on which maintenance was last completed

• N

EXT

MAINTENANCE

: Date on which maintenance should next be completed

Summary of Contents for Lector 620







































































































































































Search results

Summary of Contents for Lector 620

Reviews:

Brands by name

Popular brands

SICK Lector 620, Online Help Manual

Search results

Summary of Contents for Lector 620

Reviews:

Brands by name

Popular brands