manualshive.com logo in svg

SICK Lector 620, Online Help Manual

Share
Download
SICK Lector 620 Online Help Manual Download Page 164

Chapter

 6

ONLINE HELP SOPAS

LECTOR®620

164

©

 SICK AG · Germany · All rights reserved · Subject to change without notice

8013778/Y269/2013-11-27

Service

6.2

System status

Device status information that has been recorded is displayed on the 

System status

 tab. 

This purpose of this data is to analyze the connections to the device and identify any system 
errors that arise.

6.2.1

System information

 The 

System information

 group displays the messages from the device log file that can be 

used for connection analysis and diagnostic purposes.

6.3

Reading field/Scanning frequency

Reading field diagrams and scanning frequency diagrams are displayed on the 

Reading 

field/Scanning frequency

 tab.

The diagrams are important for the application layout and help with the correct alignment 
and mounting of the device.

Summary of Contents for Lector 620







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands