manualshive.com logo in svg

SICK Lector 620, Online Help Manual

Share
Download
SICK Lector 620 Online Help Manual Download Page 46

Chapter

 5

ONLINE HELP SOPAS

LECTOR®620

46

©

 SICK AG · Germany · All rights reserved · Subject to change without notice

8013778/Y269/2013-11-27

Parameters

5.7.2.5

2/5 Interleaved

If the 

2/5 Interleaved

 parameter is activated, decoding is activated for the code type.

 

 As only activated code types are processed, you can increase the processing speed by 

specifically activating/deactivating the required code types.

 
• Code name: 

2/5 Interleaved

 or ITF (2-value)

• Character set: Numeric characters
• Structure: 5 code elements per character, 2 of which wide and 3 narrow (characters at 
uneven positions are represented by bars. Characters at even positions are represented by 
gaps.)
• Intrinsic reliability: Low
• Space required: Low (with up to 18 characters)
• Standard: ISO/IEC 16390
• Area of application: Packet and postal service

5.7.2.6

Code 93

If the 

Code 93

 parameter is activated, decoding is activated for the code type.

 

 As only activated code types are processed, you can increase the processing speed by 

specifically activating/deactivating the required code types.

 
• Code name: 

Code 93

 (4-value)

• Character set: 43 alphanumeric characters (10 digits, 26 upper-case letters, 7 special 
characters: Blanks, -, ., $, /, + and %)
• Intrinsic reliability: Medium
• Space required: Low
• Standard: ISO/IEC 16388
• Area of application: Packet and postal service

5.7.2.7

Code 128 Family

If the 

Code 128 Family

 parameter is activated, decoding is activated jointly for code types 

Code 128

 and 

EAN 128

. (Code type 

Pharmacode

 must be deactivated.)

 

 As only activated code types are processed, you can increase the processing speed by 

specifically activating/deactivating the required code types.

Summary of Contents for Lector 620







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands