ONLINE HELP SOPAS
Chapter
5
LECTOR®620
Parameters
8013778/Y269/2013-11-27
©
SICK AG · Germany · All rights reserved · Subject to change without notice
55
5.7.7.1.6
Hex – ASCII output
parameter is activated, every code character is output as a hexa-
decimal value. If the parameter has deactivated the hexadecimal output, the code contents
are output directly as ASCII characters. If the code contains control characters during the
ASCII output, these are replaced by the @ character to avoid conflicts with the protocol fra-
mework.
Converting the code contents into hexadecimal values enables all characters – including
control characters – to be output.
5.7.7.2
Length
Codes with a defined number of characters can be excluded from the reading process via
the parameters in the
Limiting the number of codes to be read reduces the decoding time.
5.7.7.2.1
Code length
parameter to restrict the permitted number of characters in a
code.
• F
REE
: Codes of any code length are read.
• I
NTERVAL
: The
parameter can be used to define the minimum and maximum code
length. Only codes with a code length between these two values are read.
• F
IXED
: The
parameter is used to define several fixed code lengths. Only codes
with one of these defined code lengths are read.
5.7.7.2.2
Interval
parameter can be used to define the minimum and maximum code length. Only
codes with a code length between these two values are read.
By defining a minimum and maximum code length, you restrict the range of codes to be
read. This can lead to a reduction in the decoding time.
5.7.7.2.3
Fixed length
parameter is used to define several fixed code lengths. Only codes with one
of these defined code lengths are read.
By defining certain permitted code lengths, you restrict the range of codes to be read.
This can lead to a reduction in the decoding time.
5.7.8
UPC/GTIN/EAN
parameter is activated, decoding is activated for the
,
,
active code types. The configuration tab for the cor-
responding code types can be seen and opened in SOPAS ET.
As only activated code types are processed, you can increase the processing speed by
deactivating the code types that are not being used.