![background image](http://html.mh-extra.com/html/sick/lector-620/lector-620_online-help-manual_1264275084.webp)
Chapter
5
ONLINE HELP SOPAS
LECTOR®620
84
©
SICK AG · Germany · All rights reserved · Subject to change without notice
8013778/Y269/2013-11-27
Parameters
5.8.5.3
General Match code teach-in - settings
The
General Match code teach-in - settings
group contains the parameters for teaching in
matchcodes.
The two matchcodes are stored in the
group respectively and can be subsequently modified individually.
5.8.5.3.1
Start teach-in
parameter is used to select the signal that triggers automatic teach-in of
a matchcode.
• A
UTOMATIC
/
STATIC
: The reading gate is automatically opened by a signal (e.g. a key switch).
The next read code is taught in as a matchcode.
• M
ACHINE
TRIGGER
/
DYNAMIC
: Matchcode teach-in is prepared by a signal (e.g. a key switch)
at one of the digital inputs of the LECTOR
®
620. After the reading gate has been opened
(usually by a light barrier), the next read code is taught in as a matchcode.
5.8.5.3.2
Allowed code types
parameter to define which code types are to be taught in
as the matchcode.
As every code of a different code type could also be interpreted as a pharmacode, the Phar-
macode code type must be selected exclusively.
• A
CTIVATED
CODE
TYPES
: In accordance with the code configuration, all activated code types
are accepted for matchcode teach-in. To ensure that the desired code type can be read, the
code configuration must first be checked.
• A
LL
TYPES
(
EXCEPT
P
HARMACODE
): All code types except Pharmacode are accepted for match-
code teach-in.
• O
NLY
P
HARMACODE
: Only codes of code type Pharmacode are accepted for matchcode
teach-in.
5.8.5.3.3
Code configuration
parameter to define whether and how the teaching in of a
matchcode should affect the current code configuration.
• D
ON
'
T
CHANGE
: The current code configuration is not changed by a matchcode teach-in. All
configured code types can continue to be read.
• L
IMIT
TO
LAST
TAUGHT
CODE
: The code configuration is adapted to the taught-in matchcode.
The parameters for code type, code length, and code content are limited to the properties
of the matchcode. As a result, only codes that match the matchcode can be read.
• E
XPAND
BY
LAST
TAUGHT
CODE
: The code configuration is adapted to the taught-in matchcode
by also activating the parameters for the taught matchcode. As all other code settings re-
main unchanged, all configured code types can continue to be read.