background image

USER GUIDE AND SPECIFICATIONS

NI 6509

This document contains information about using the NI PCI-6509, 
NI PXI-6509, and NI PCIe-6509 data acquisition devices with the 
NI-DAQmx driver software.

Note

For information about using the NI USB-6509 device, refer to the 

NI USB-6509 

User Guide and Specifications

 document.

The NI 6509 is a 96-bit, high-drive digital input/output (DIO) device. 
The NI 6509 features 96 TTL/CMOS-compatible digital I/O lines, 24 mA 
high-drive output, digital filtering, programmable power-up states, change 
detection, and a watchdog timer.

Contents

Configuration .......................................................................................... 3

Programming Devices in Software .................................................. 4

Functional Overview............................................................................... 5
Safety Information .................................................................................. 6
Electromagnetic Compatibility Guidelines............................................. 8
Related Documentation........................................................................... 9
I/O Connector.......................................................................................... 9

Pin Assignments .............................................................................. 10

SH100-100-F Connector........................................................... 10
R1005050 Connector ................................................................ 12

Signal Descriptions .......................................................................... 13

Digital I/O ............................................................................................... 14

Static DIO on NI 6509 Devices ....................................................... 14
I/O Protection................................................................................... 14
I/O Pull-Up/Pull-Down Resistors (NI PCIe-6509 Only)................. 15
Signal Connections .......................................................................... 16

ni.com/manuals

De

u

tsch

Français

Summary of Contents for 6509

































Reviews: