![background image](http://html1.mh-extra.com/html/sick/backup-assistance-system/backup-assistance-system_operating-instructions-manual_1264392059.webp)
COMMISSIONING
6
59
8022161-1B29 / V2-0/2021-04|SICK
Subject to change without notice
T R A N S L A T I O N O F A N O R I G I N A L O P E R A T I N G I N S T R U C T I O N S | Backup Assistance System
6.5
Importing configuration
A saved configuration can be quickly transmitted to other 2D LiDAR sensors. This is
useful, for example, when commissioning multiple vehicles or replacing a 2D LiDAR
sensor.
▸
Connect 2D-LiDAR sensor to configuration PC (see chapter
).
▸
Start SOPAS and perform device search if necessary (see chapter
▸
Transfer device to project and open configuration interface by double-clicking on device
tile (see chapter
6.2.7 Opening configuration interface
▸
Adopt parameters from the SVD device file with
Device
→
Import SVD file
.
▸
Select saved configuration and start import. The new 2D LiDAR sensor scanner is
displayed in the project tree with the saved configuration.
▸
Now open the configuration interface and check and, if necessary, adjust the geometry
of the monitoring fields (see chapter
6.3 Adapting the geometry of the monitoring