![background image](http://html1.mh-extra.com/html/sick/backup-assistance-system/backup-assistance-system_operating-instructions-manual_1264392043.webp)
COMMISSIONING
6
43
8022161-1B29 / V2-0/2021-04|SICK
Subject to change without notice
T R A N S L A T I O N O F A N O R I G I N A L O P E R A T I N G I N S T R U C T I O N S | Backup Assistance System
6
Commissioning
Commissioning may only be performed by qualified persons.
•
Qualified persons have the specialist training, skills, experience and knowledge of the
relevant regulations and standards needed to be able to perform work assigned to
them and to identify and avoid any potential dangers independently.
•
Electricians have the professional training, skills, experience and knowledge of the
relevant standards and provisions needed to work on electrical systems and to detect
and avoid any potential dangers independently.
6.1
System start-up
All system components are automatically launched when starting the vehicle. The system
is ready for operation after approximately 30 seconds.
Fig. 41: Reading the operational readiness on the 2D LiDAR sensor
•
After the supply voltage is switched on, the TiM351 initializes and the green LED lights
up to indicate its operational readiness.
•
The 2D LiDAR sensor begins its readiness to measure automatically.
Operational readiness
of 2D LiDAR sensor