![background image](http://html1.mh-extra.com/html/sick/backup-assistance-system/backup-assistance-system_operating-instructions-manual_1264392058.webp)
6
COMMISSIONING
58
8022161-1B29 / V2-0/2021-04|SICK
T R A N S L A T I O N O F A N O R I G I N A L O P E R A T I N G I N S T R U C T I O N S | Backup Assistance System
Subject to change without notice
6.4.2
Testing the configuration of the monitoring fields
Once the configuration has been verified and permanently saved in the 2D LiDAR sensor,
the BAS driver assistance system will start with the loaded configuration.
Checking the correct stopping and warning behavior of the system in regular cycles is
recommended, but at the latest each time the vehicle is commissioned.
▸
Check monitoring fields along the outer boundaries for detection.
▸
To do this, walk along them or check the functionality with suitable aids.
•
The system must trigger accordingly each time an object is detected (see chapter
6.4.3
Exporting configuration to device file
▸
After a successful test, save the current parameters and settings as a
device file
in
SVD format. The SVD device file is independent of the SOPAS version.
NOTE!
This means that when the 2D LiDAR sensor is replaced, the device data can be
transferred directly to the replacement device.
▸
In the
Device
menu, click
Export SVD file
.
▸
Specify file name and location.
▸
Click on
Next
. The device file is saved.
▸
End export with
Complete
.
Checking object
detection