![background image](http://html1.mh-extra.com/html/sick/backup-assistance-system/backup-assistance-system_operating-instructions-manual_1264392052.webp)
6
COMMISSIONING
52
8022161-1B29 / V2-0/2021-04|SICK
T R A N S L A T I O N O F A N O R I G I N A L O P E R A T I N G I N S T R U C T I O N S | Backup Assistance System
Subject to change without notice
▸
Check representation. Do this by placing an object in the measuring range and then
checking the result on the screen.
▸
Check that the scan line moves with the object and correctly reflects the changed
surrounding contour (arrow).
▸
In the
Field selection
area, select field set 9. This field set is relevant for the BAS driver
assistance system.
•
The predefined fields for the driver assistance system are now visible in the scan
range. The stopping
(field 1
) is located on the very inside. It is activated after selection
of the field set and is shown in red.
•
The stopping field is surrounded by the larger warning field. The external third field is
not used by the driver assistance system.
ATTENTION!
FIELD SET 9 MUST BE SELECTED.
▸
The selection of field set 9 is absolutely necessary for proper functioning of the
driver assistance system.
Selecting
field set