![background image](http://html1.mh-extra.com/html/sick/backup-assistance-system/backup-assistance-system_operating-instructions-manual_1264392053.webp)
COMMISSIONING
6
53
8022161-1B29 / V2-0/2021-04|SICK
Subject to change without notice
T R A N S L A T I O N O F A N O R I G I N A L O P E R A T I N G I N S T R U C T I O N S | Backup Assistance System
6.3.2
Adjusting the display view
▸
Adjust the spatial situation on the screen so that the scan lines and the geometry of
the monitoring fields can be easily recognized.
NOTE!
The view of the scanned area is not saved. You must repeat the setting whenever
SOPAS is restarted. The same applies if you switch to a different window.
▸
Enlarge or reduce the display area with zoom functions. To do this, click on one of the
two icons. The mouse cursor is now a magnifying glass icon.
▸
Click in the display area. Every click of the mouse causes the display to zoom in or
zoom out.
NOTE!
Zooming in/zooming out always originates at the position of the mouse cursor.
▸
Click on the magnifying glass symbol again to switch off the zoom function.
NOTE!
The scale of the coordinate system automatically adapts to the current zoom
level.
•
Click on the
Display all active points
icon to zoom in or zoom out on the view of all
active points of the monitoring field.
•
The
Display maximum sight range of the sensor
icon shows the 2D LiDAR sensor with
all scan lines and the monitoring fields in the display area.
•
The right area with the display of outputs and evaluation cases can be hidden to make
more space for the display of the 2D LiDAR sensor and the scanned surrounding
contour.
▸
To do this, click on the double arrow on the right edge of the monitor window.
▸
Click on the double arrow again. The area is displayed again.
•
The
Full-screen presentation
icon displays the monitor window over the entire screen.
•
The
Close full-screen presentation
icon returns to the previous display.
Depending on the mounting situation of the 2D LiDAR sensor, you can rotate the view of
the field editor for better orientation.
▸
Use the
Rotation
field for this purpose.
▸
Enter the rotation angle of the view.
▸
Change the rotation angle of the view step-by-step using the arrow keys to the right of
the field.
▸
NOTE!
If necessary, click the
Show all active points
icon again.
Zooming in/zooming
out the display area
Additional
settings
Rotating the
display area