MOUNTING
4
29
8022161-1B29 / V2-0/2021-04|SICK
Subject to change without notice
T R A N S L A T I O N O F A N O R I G I N A L O P E R A T I N G I N S T R U C T I O N S | Backup Assistance System
4.2.5
Using SICK mounting kit
Fig. 23: SICK mounting kit with weather protection housing
Legend
1
Adapter plate
2
Mounting bracket
•
The TiM351 2D LiDAR sensor is supplied with a mounting kit to match the device type.
•
This U-shaped mounting kit acts as a bracket with impact protection.
•
It comprises a mounting bracket and a mounting plate for mounting and fine
adjustment of the 2D LiDAR sensor.
Fig. 24: Mounting on adapter plate
▸
Fasten the 2D LiDAR sensor to the adapter plate using the two M3 x 8 screws.
▸
Insert the screws from below through the hole in the mounting bracket and the hole in
the adapter plate.
NOTE!
With its rotatable connector unit, the TiM351 offers greater flexibility and space for
installation.
WARNING!
RISK OF DAMAGE TO THE CONNECTOR
▸
Turn the swivel connector unit with the electrical connections max 180° from end
position to end position.
Mounting
TiM351 on
adapter plate