![background image](http://html1.mh-extra.com/html/sick/backup-assistance-system/backup-assistance-system_operating-instructions-manual_1264392023.webp)
MOUNTING
4
23
8022161-1B29 / V2-0/2021-04|SICK
Subject to change without notice
T R A N S L A T I O N O F A N O R I G I N A L O P E R A T I N G I N S T R U C T I O N S | Backup Assistance System
4
Mounting
All transport, assembly, mounting, and electrical installation work must only be carried out
by qualified persons.
Qualified persons have the specialist training, skills, experience and knowledge of the
relevant regulations and standards needed to be able to perform work assigned to them
and to identify and avoid any potential dangers independently.
4.1
Function test before mounting
▸
Before mounting the system components on the industrial truck, check the functional
readiness of the devices.
▸
To do this, place components on a table
▸
Connect components according to the wiring overview in chapter
▸
Establish the supply voltage and check the general operational readiness of the
components (see chapter
NOTE!
Before mounting, check the required lengths of cable and adjust them if necessary.
Cables may only be shortened, not extended!