![background image](http://html1.mh-extra.com/html/sick/backup-assistance-system/backup-assistance-system_operating-instructions-manual_1264392057.webp)
COMMISSIONING
6
57
8022161-1B29 / V2-0/2021-04|SICK
Subject to change without notice
T R A N S L A T I O N O F A N O R I G I N A L O P E R A T I N G I N S T R U C T I O N S | Backup Assistance System
The geometry of the warning field is processed analogously to the stopping field and
adapted to the spatial conditions.
▸
On the right side of the window, in the
Monitoring field
area, select
Field 2
(warning
field) for editing.
The warning field is shown red in the graphic.
▸
Adjust the field geometry of the warning field as described.
6.4
Completing configuration
6.4.1
Transmitting parameters to the 2D LiDAR sensor
All geometries modified in SOPAS are transmitted to the connected 2D LiDAR sensor
and executed. However, the data is only stored
temporarily
in the sensor.
To retain the changes after the 2D LiDAR sensor is restarted, the configuration must be
permanently saved in the sensor.
▸
Click on
Permanently save parameters
in the SOPAS toolbar.
The configuration is transferred to the 2D LiDAR sensor and saved there permanently.
It is loaded each time the 2D LiDAR sensor is restarted.
Editing
warning field
Saving the
configuration in the
non-volatile memory