![background image](http://html1.mh-extra.com/html/sick/backup-assistance-system/backup-assistance-system_operating-instructions-manual_1264392063.webp)
MAINTENANCE
7
63
8022161-1B29 / V2-0/2021-04|SICK
Subject to change without notice
T R A N S L A T I O N O F A N O R I G I N A L O P E R A T I N G I N S T R U C T I O N S | Backup Assistance System
7.2
Replacing components
7.2.1
Replacing the 2D LiDAR sensor
WARNING!
▸
Disconnect the system from the power supply before carrying out installation or
maintenance work.
If the device parameters have been stored on the configuration PC as a project or device
file, the replacement device can be configured quickly and conveniently by importing the
saved parameter set.
Part no.
Meaning
1067299
TiM351 2D LiDAR sensor
▸
Loosen the M12 round connector on the 2D LiDAR sensor and remove the connecting
cable from the 2D LiDAR sensor.
▸
Remove the defective 2D LiDAR sensor from the bracket.
▸
Mount the replacement device.
✓
Connect the cable to the new 2D LiDAR sensor and screw on the M12 plug connector.
▸
Import saved configuration into replacement device (see chapter
Replacement device
Replacing the device
Adopting configuration
of the predecessor
device