![background image](http://html1.mh-extra.com/html/sick/backup-assistance-system/backup-assistance-system_operating-instructions-manual_1264392030.webp)
4
MOUNTING
30
8022161-1B29 / V2-0/2021-04|SICK
T R A N S L A T I O N O F A N O R I G I N A L O P E R A T I N G I N S T R U C T I O N S | Backup Assistance System
Subject to change without notice
Fig. 25: Aligning 2D LiDAR sensor
▸
Align the scan plane by means of the three cheese-head screws.
▸
After adjustment, lock the adapter plate against the mounting bracket by means of the
two studs.
Fig. 26: Mounting the mounting bracket on the attachment mechanism of the industrial truck
▸
Fasten the mounting bracket horizontally or vertically to the attachment mechanism of
the industrial truck.
•
The mounting bracket has two holes with a diameter of 4.3 mm on the bottom and rear
sides.
NOTE!
The attachment mechanism of the industrial truck must ensure the required tilt
angle of the 2D LiDAR sensor.
Fig. 27: Mounting kit
▸
Use the supplied mounting kit to screw on the mounting bracket.
•
The kit consists of screws, nuts and washers as well as the two RAM MOUNT brackets
and a RAM MOUNT socket arm (see the following chapter
).
Aligning
sensor
Mounting the mounting
bracket on the
attachment mechanism
of the industrial truck
Mounting kit