Sharp AR-BC260 Operation Manual Download Page 1

Page: 1 / 184

•

BEFORE USING
THE PRODUCT

•

MANAGING THE MACHINE

•

PERIPHERAL DEVICES

•

BEFORE MAKING
COPIES

•

BASIC PROCEDURE
FOR MAKING COPIES

•

CONVENIENT COPY
FUNCTIONS

•

MACHINE MAINTENANCE
(FOR COPYING)

•

SPECIFICATIONS

1-1

2-1

3-1

4-1

5-1

6-1

7-1

8-1

Page

DIGITAL FULL COLOR MULTIFUNCTIONAL
SYSTEM

OPERATION MANUAL

(for general information and copier operation)

MODEL

AR-BC260

(Option) Duplex bypass / inverter unit and

Stand / 3 x 500 sheet paper drawer

Be sure to become thoroughly familiar with this manual to
gain the maximum benefit from the product.

Before installing this product, be sure to read the
installation requirements and cautions sections.

Be sure to keep all operation manuals handy for reference
including this manual, the "Operation manual (for general
information and copier operation)" and operation manuals
for any optional equipment which has been installed.

KS1

CZZ

ApollonII_general-copy_SEC.book 1

ページ

２００４年９月６日　月曜日　午後４時５７分

Summary of Contents for AR-BC260

























































































































































































Search results

Summary of Contents for AR-BC260

Reviews:

Sharp AR-BC260, Operation Manual, Page: 1 / 184

Search results

Summary of Contents for AR-BC260

Reviews: