sauter equitherm EQJW245, Operating Manual

Page: 76 / 127

76/127 www.sauter-controls.com
EQJW245
Set 5.4 valve position
0
Press the input knob at POS 1 1.
(or POS2 for the 2nd fi nal control
element). I.e. select the ‚fi nal control
element opening‘ menu sub-item.
30
Turn the input knob. 2.
Value for fi nal control element
Â
opening in per cent.
Pos 1
Press the input knob. 3.
Confi rm the value.
Â
Set status of other outputs (pumps, con fi gurable output) for manual mode 5.5
UP 1
Turn the input knob. Select the output 1.
you want. (UP 1 = heating pump, LP
= charge pump, rEL = confi gurable
output).
0
Press the input knob. 2.
Select the menu sub-item. 3.
1
Turn the input knob. 4.
Specify pump output (0= pump off, 5.
1=pump on)
UP 1
Press the input knob. 6.
The preset is accepted.
Â
5.6 Exit manual mode
You exit manual mode as soon as you turn the rotary switch to another position.
Check measured values in manual mode 5.7
Turn the input knob until the „INFO“ 1.
sub-item in the Display menu is
shown
15:06
Press the input knob. 2.
Select menu sub-item „INFO“ 3.