sauter equitherm EQJW245, Operating Manual

Page: 59 / 127

EQJW245
59/127 www.sauter-controls.com
Operation
4.2
°C
The outdoor temperature that is
Â
currently measured.
45.0
°C
Then you see the domestic
Â
water setpoint (if domestic water
preparation was confi gured)
45.3
°C
The current measured domestic
Â
water temperature (if domestic water
preparation was confi gured).
14:22
Turn the knob further in a clockwise 3.
direction to display the time again..
You can also turn the knob in the opposite direction to scroll backwards through
the displays. In some cases, more displays can be added to the display loop, e.g.
Show setpoint and actual value for return temperature
The display (see 7), can be added in case of a fault A display of the connection
status can be added for modem operation (see 6.4)
Press the ESC button once to go directly to the time display.
Entering the setpoint temperature in normal mode 4.2
To enter setpoints, the bottom rotary switch must be moved to one of the following
positions (see 4.1).
Off mode
Continuous heating to normal domestic water temperature
Continuous heating to increased domestic water temperature
Automatic mode
The middle rotary switch must be in one of the following positions (see section
2.1).
Back-up mode
Reduced mode