sauter equitherm EQJW245, Operating Manual

Page: 24 / 127

24/127 www.sauter-controls.com
EQJW245
Commissioning
SP 19
To leave the value unchanged, press 4.
ESC to exit the display.
Change SERVice parameters 3.3.3
Press the ESC key to cancel the operation. The value is not accepted unless it
has already been confi rmed.
SP 19
Turn the input knob. 1.
Select the SERVice parameter you 2.
want.
120
sec
Press the input knob. 3.
The value of the parameter is shown.
Â
90
sec
Turn the input knob. 4.
The value of the parameter is
Â
changed.
SP 19
Press the input knob. 5.
The new value is confi rmed.
Â
List of SERVice parameters 3.3.4
Parameter Description Range
Step
value
SP01 Software version Y.XX
SP02 Equipment status (error coding) 0 to 9999 1
SP03 Display log book
SP04
Software reset
0 = no reset
1 = SP + CP parameters default
2 = Switching commands default
3 = SP + CP para switching commands default
0 to 3 1
SP05 0
Manual mode
0 = Manual mode not enabled
1 = Manual mode enabled
0 to 1 1
SP06 1
Control models
1 = one control valve at primary side with readjusted HK at
secondary side
2 = one control valve at primary side with readjusted HK + BW at
secondary side
3 = two control valves at primary side (for HK / HK + BW)
4 = two readjusted circuits (2 x HK) at secondary side
5 = two readjusted circuits (1 x HK, 1 x BW) at secondary side
6 = two readjusted circuits (1 x HK, 1 x BW with HK) at second. side
7 = direct control of BW and HK + one readjusted HK at second. side
8 = two control valves (1 x at primary side for HK / 1 x for direct BW
charging without mixing control)
1 to 8 1