sauter equitherm EQJW245, Operating Manual

Page: 72 / 127

72/127 www.sauter-controls.com
EQJW245
Operation
It is advisable to record any changes made to the weekly switching programmes
in the relevant table in the section entitled ‚Overview of controller settings‘.
Before the weekly switching programme can be called up, viewed or edited, the
user should carefully check that the upper und middle rotary switch is in one of
the following positions (see ‚Operating modes‘):
Back-up mode
Reduced mode
Normal mode
Automatic mode
The weekly switching programme works only if the relevant output has been
confi gured as a pilot timer or for activating a circulating pump (see SP 49). The
weekly switching programme can be viewed and edited regardless of how the
output is confi gured.
Calling up the weekly switching programme 4.11
1 - 7
Set the bottom rotary switch to 7.
PROG .
5
Turn the input knob. 8.
Select day of the week (1=Monday,
2= Tuesday, 1 - 7 daily). In this
example, 5 = Friday was chosen.
0000
Press the input knob. 9.
The fi rst switching command for that
Â
day (or the whole week) is shown.
View switching command 4.11.1
07:00
Turn the input knob.
Each switching command is shown.
Â
An empty switching command is
Â
indicated by ‚_ _ _ _‘.
Enter switching command 4.11.2
----
Turn the input knob to the next empty 1.
switching command
0000
Press the input knob. 2.
New switching command is shown.
Â