sauter equitherm EQJW245, Operating Manual

Page: 64 / 127

64/127 www.sauter-controls.com
EQJW245
Operation
4.5 Calendar switching programme
Calling up the calendar switching programme 4.5.1
The calendar programme can infl uence the automatic mode of both heating
circuits over longer periods, in addition to the weekly programme. The calendar
switching programme specifi es date periods (e.g. for holidays) when the weekly
switching programme is only enabled up to a defi ned mode. A maximum of 20
switching commands (10 periods) comprising the date and mode are available
for this purpose. These can be entered in the day grid. An ‚empty‘ switching
programme is interpreted as a switching programme in normal mode. The
switching commands are captive. You are recommended to note any change
to the calendar switching programme in the relevant table in section 15.5. No
commands are entered in the calendar switching programme in the factory
setting. The calendar switching programme does not infl uence the switching
programme for domestic water preparation or the switching programme for the
confi gurable output.
Before you can call up, view or edit the calendar switching programme, the
bottom rotary switch must be moved to one of these positions (see 4.1).
Off mode
Continuous heating to normal domestic water temperature
Continuous heating to increased domestic water temperature
Automatic mode
The middle rotary switch must be in one of the following positions (see section
2.1).
Back-up mode
Reduced mode
Normal mode
Automatic mode
1
Set the top rotary switch to PROG. 1.
2
Turn the input knob to go to the 2.
calendar programme.
Procedure