sauter equitherm EQJW245, Operating Manual

Page: 58 / 127

58/127 www.sauter-controls.com
EQJW245
Operation
Displays when back-up mode, reduced mode and normal mode are set 4.1.2
To show the various displays described below, the bottom rotary switch must be
moved to one of the following positions (see 4.1).
Off mode
Continuous heating to normal domestic water temperature
Continuous heating to increased domestic water temperature
Automatic mode
The middle rotary switch must be in one of the following positions (see section
2.1).
Back-up mode
Reduced mode
Normal mode
Automatic mode
14:22
After you select the switch position 1.
for the top rotary switch, the current
time is shown. The current operating
status (here: sun for normal mode =
daytime operation) and the current
status of the outputs are shown on
the lower margin of the display (not
illustrated here, see 2.6)
21.0
°C
Turn the input knob further 2.
clockwise to show the room setpoint
temperature (only if a room sensor is
present)
21.1
°C
Then the current actual value for the
Â
room temperature (only if a room
sensor is present).
54.8
°C
The fl ow setpoint (not available in
Â
OFF mode or summer mode, for
example).
54.6
°C
The current actual value for the fl ow
Â
temperature.