sauter equitherm EQJW245, Operating Manual

Page: 60 / 127

60/127 www.sauter-controls.com
EQJW245
Operation
Normal mode
Automatic mode
20.0
°C
After you select the position for the 1.
upper rotary switch, the current room
setpoint temperature for nominal
mode is shown.
20.0
°C
Push the input knob and the
Â
numerical value will fl ash...
21.0
°C
... and you can now change it by
Â
turning it upwards or downwards
(step value: 0.1°C).
21.0
°C
Push the input knob again to confi rm 2.
the changed numerical value.
Press the ESC button once before confi rming to cancel the input. The old value is
retained.
Enter setpoint temperature in reduced mode 4.3
To enter setpoints, the bottom rotary switch must be moved to one of the following
positions (see 4.1).
Off mode
Continuous heating to normal domestic water temperature
Continuous heating to increased domestic water temperature
Automatic mode
The middle rotary switch must be in one of the following positions (see section
2.1).
Back-up mode
Reduced mode
Normal mode
Automatic mode