2 INT-GSM
SATEL
1. Introduction
This manual describes the INT-GSM module and how it should be installed and configured.
The module is supported by the INTEGRA / INTEGRA Plus alarm control panels with
firmware version 1.18 or newer. The module can be connected directly to the control panel or
to the ETHM-1 Plus module (firmware version 2.05 or newer required) which is connected to
the INTEGRA / INTEGRA Plus control panel.
2. Features
Communication
Built-in GSM telephone designed for use in the 850 / 900 / 1800 / 1900 MHz cellular
networks.
Dual SIM support (nano-SIM).
Both SIM cards can be used simultaneously to receive incoming messages and calls.
Possibility to remotely check the account balance and validity of the SIM card installed in
the module.
Possibility to define the MCC / MNC code of the operator of network into which the module
is to log in.
Advanced 192-bit key based algorithm for encryption of GPRS transmissions.
Reporting
Reporting events to two monitoring stations via GSM network.
Two transmission paths:
GPRS,
SMS messages.
Defining priority for transmission paths.
Messaging
Event notifications in the form of automatically created SMS messages, based on
descriptions from the control panel event log.
16 telephone numbers to be notified.
Event notifications in the form of automatically created e-mail messages, based on
descriptions from the control panel event log, provided the module is used in conjunction
with the INTEGRA Plus control panel.
16 e-mail addresses to be notified.
Informing users of the INTEGRA
CONTROL application about events using push
notifications.
Control
Control of alarm system by means of:
SMS messages,
CLIP (toll-free),
GUARDX program (GPRS),
INTEGRA CONTROL application (GPRS).
You can define telephones authorized to control the alarm system by SMS or CLIP.
You can indicate the control functions available from any telephone.