24 INT-GSM
SATEL
(“Structure” window
“Hardware” tab
“Keypads” branch
[module name] branch
“GUARDX/ INTEGRA CONTROL” item
“Macro Commands” tab).
Defined macro commands can be automatically downloaded by the INTEGRA CONTROL
application after establishing connection with the INT-GSM module.
Macro commands can be loaded into the application without establishing connection with the
module. The file containing macro commands can be exported, and then saved to the mobile
device memory (to transfer the file, you can use a memory card or other solutions available
for the given device). This method allows you to use macro commands defined for the e.g.
INT-TSG keypad in the INTEGRA CONTROL application. Instead of a file with macro
commands defined for the INT-GSM module, you can load a file with macro commands
defined for the keypad.
The data related to macro commands are stored in the module memory. Before you
start defining the macro commands, click on the “Read” button in the “Macro
commands” tab to read the data from the module. Having defined the macro
commands, click on the “Write” button in the “Macro commands” tab to write the data
to the module. The macro command related data are not read / written when you click
on the
button in the main menu of DLOADX program.
Buttons
Read
– click to read the macro command related data from the module.
Write
– click to write the macro command related data to the module.
Quit
– click to cancel reading or writing the macro command related data.
Reset
– click to delete all the defined macro commands (and restore factory default settings).
5.5.1 Groups
The macro commands which are to be available to the INTEGRA CONTROL application
users must be assigned to one of the four groups. You can assign up to 16 macro commands
to the groups. The DLOADX program presents the macro command groups and the macro
commands assigned to them in the tree form.
Name
– name of the macro command group (up to 16 characters in two lines, up to 8
characters in the line). Do not enter the name if it is not to be displayed.
Icon
– icon of a group of macro commands. Click
to display the list of available icons.
Add macro
– button available after you click on a macro command group. Clicking on the
button will display a list of defined macro commands. Click on the name to add the macro
command to the group.
Remove macro
– the button is available after you click on any macro command. It removes
that macro command from the group.
– click to move the highlighted macro command down within the group.
– click to move the highlighted macro command up within the group.
Export to file
– click on the button to export defined macro commands to a file. The file with
macro commands can be loaded into the INTEGRA CONTROL application or imported to
another device that support macro commands.
Import from file
– click to import macro commands from a file.