manualshive.com logo in svg

Satel INT-GSM, Manual, Page: 36 / 43

Share
Download
Satel INT-GSM Manual Download Page 36

34 INT-GSM 

SATEL 

 

 

Fig. 21. GUARDX program: “Communication Identifiers” tab in “Connection” window. 

 

“TCP/IP” tab 

The settings below apply to direct communication with the module. 

Server port

 – the number of TCP port used during communication between the control panel 

and computer with GUARDX program. 

Server key

 – a string of up to 12 alphanumeric characters (digits, letters and special 

characters) used for data encryption during communication between the control panel and 
the computer with GUARDX. Click on 

 to show the number entered. 

 

 

Fig. 22. GUARDX program: “TCP/IP” tab in “Connection” window. 

 

“Satel sever” tab 

The settings below apply to communication via the SATEL server. 
Select the “INT-GSM IMEI” variant. 
I

NT-GSM IMEI

 – individual ID number of the GSM telephone of module. 

INT-GSM ID

 – individual ID number assigned to the INT-GSM module by the SATEL server. 

GUARDX key

 – a string of up to 12 alphanumeric characters (digits, letters and special 

characters), used for data encryption during communication between the control panel and 
the computer with GUARDX program. 

Click on 

 to show the numbers entered. 

Summary of Contents for INT-GSM












































Reviews:

No comments