manualshive.com logo in svg

Satel INT-GSM, Manual, Page: 13 / 43

Share
Download
Satel INT-GSM Manual Download Page 13

SATEL INT-GSM 

11 

DLOADX 

Communication with DLOADX

 [Connect DLOADX] – if this option is enabled, connection 

can be established between the DLOADX program and the alarm control panel via the 
module. 

DLOADX key 

[Key (DLOADX)] – a string of up to 12 alphanumeric characters (digits, letters 

and special characters) used for data encryption during communication with the DLOADX

 

program via module. 

DLOADX server

 [DLOADX IP] – address of the computer with DLOADX program. If the 

computer is not in the same local network, it must be a public address. You can enter 
either the IP address or the domain name. 

In the LCD keypad, the function for programming address of the computer with 
DLOADX program is available in the user menu, C

HANGE OPTIONS 

submenu (available 

to service and administrators). 

Port

 [Port (DLOADX)] – number of the TCP port used for communication with the DLOADX

 

program. You can enter values from 1 to 65535. The value must be different from that 
entered for the other ports. Default value: 7090. 

GUARDX / INTEGRA CONTROL 

GUARDX

 [Connect GUARDX] – if this option is enabled, connection can be established 

between the GUARDX program and the alarm control panel via the module. The option is 
not available when the “INTEGRUM (client)” option is enabled. 

INTEGRA CONTROL

 [Connect GSM] – if this option is enabled, connection can be 

established between the INTEGRA CONTROL application and the alarm control panel via 
the module. The connection is set up by the SATEL server. The option is not available 
when the “INTEGRUM (client)” option is enabled. 

INTEGRUM (client)

 [INTEGRUM] – if this option is enabled, connection can be established 

between the INTEGRUM system (version 2.0 or newer) and the alarm control panel via the 
module. When the option is enabled, the “GUARDX” and “INTEGRA CONTROL” options 
are not available. 

GUARDX server

 [GUARDX IP] – address of the computer with GUARDX program or the 

INTEGRUM server. If the computer is not part of the same local network, it must be 
a public address. For the computer with GUARDX program, you can enter the IP address 
or domain name. For the INTEGRUM system server, enter the domain name (e.g. 
integrum.ip.com). 

In the LCD keypad, the function for programming address of the computer with 
GUARDX program / INTEGRUM system server is available in the user menu, C

HANGE 

OPTIONS 

submenu (available to service and administrators). 

GUARDX key

 [Key (others)] – a string of up to 12 alphanumeric characters (digits, letters 

and special characters) used for data encryption during communication with: 

 GUARDX program, 

  INTEGRA CONTROL application, 

 INTEGRUM system. 

Port

 [Port (others)] – number of the TCP port used for communication with: 

 GUARDX program, 

  INTEGRA CONTROL application, 

 INTEGRUM system. 

You can enter values from 1 to 65535. The value must be different from that entered for 
the other ports. Default value: 7091. 

Summary of Contents for INT-GSM












































Reviews:

No comments