Satel INT-GSM, Manual, Page: 37 / 43

SATEL INT-GSM 35
Fig. 23. GUARDX program: “Satel server” tab in “Connection” tab.
6.1.2 Initiating connection by SMS message
Required settings of the INT-GSM module:

programmed: address of computer with GUARDX program (“GUARDX server” p. 11) and
number of TCP port used for communication, if it is to be different from 7091 (p. 11),

programmed control command which, if sent in the SMS message, will initiate connection
with the GUARDX program (see “SMS initiating GUARDX connection” p. 15).
Required settings of the GUARDX program for direct communication with the module:

programmed: number of TCP port used for communication and data encryption key
(“Server key”).
1. In the startup window (Fig. 20), “Connection” field, select “TCP/IP:
GUARDX<-ETHM/INT-GSM” and then click the “Start” button. This will display a window
with information that the program is waiting for connection.
2. Send to the INT-GSM module the following SMS message:
xxxx=
(“xxxx” – the control command to initiate establishment of communication with
GUARDX program) – the module is to connect to the computer address programmed in
the module,
xxxx=aaaa:p=
(“xxxx” – the control command to initiate establishment of communication
with GUARDX program; “aaaa” – address of the computer with GUARDX program (IP
address or domain name); “p” – TCP port) – the module is to connect to the computer
whose address has been given in the SMS message and use for communication the
TCP port given in the SMS message.
3. In the window that will open after connection is established, enter the code of control
panel administrator / user.
6.1.3 Initiating connection from the keypad (by the control panel)
Required settings of the INT-GSM module:

programmed: address of computer with GUARDX program (“GUARDX server” p. 11) and
number of TCP port used for communication, if it is to be different from 7091 (p. 11).
Required settings of the GUARDX program for direct communication with the module:

programmed: number of TCP port used for communication and data encryption key
(“Server key”).
1. In the startup window (Fig. 20), “Connection” field, select “TCP/IP:
GUARDX<-ETHM/INT-GSM” and then click the “Start” button. This will display a window
with information that the program is waiting for connection.