SATEL INT-GSM
17
Fig. 12. DLOADX program: “SMS messaging / CLIP control” tab.
CLIP control
CLIP means calling without establishing connection (you must hang up on hearing the ring
signal), i.e. toll-free. The module will identify the phone number of the calling party and
respond accordingly.
In the lines from T1 to T16, you can program the function to be run by CLIP from the given
telephone number. Additionally, you can program in the line Txx one function that can be run
in the control panel by CLIP from any telephone number. In both cases, the telephone
number must be assigned to the control panel user.
The telephone numbers programmed in the lines from T1 to T16 are not treated by the
module as any numbers.
Function
– the function to be run by CLIP. Enter the function number or click on the
button to select the function from the list. The list of available functions is defined in the
“SMS control” tab (see “Function” p. 18).
Forward SMS
SMS>>
– if this option is enabled, unknown SMS messages received by the module are
forwarded to the phone number (e.g. information received from the GSM network
operator).
5.2.4 SMS control
The module enables you to control the alarm system by using SMS messages containing
appropriate control commands. The SMS messages must be sent to the SIM card number.
You can program 32 control commands in the module.