26 INT-GSM
SATEL
No confirmation messages
– if this option is enabled, no messages will appear to inform
you about execution of a command or an error after running a macro command (the
screen from which the macro command was run will still be displayed).
Fig. 19. DLOADX program: “Definitions” tab.
Icon
Icon
– the macro command icon. The list of available icons will be displayed after you click
the
button. If the “State follow output” option is enabled, select 2 icons for the macro
commands. One icon will be displayed when the output is inactive, and the other – when
the output is active.
State follow output
– if this option is enabled, the icon of macro command will change
depending on the status of output whose number should be selected in the field on the
right side. Select an output, the status of which depends on the actions taken by the
control panel after running the macro command. Thus it will be possible to inform the
user by means of macro command icons about, for example, the status of outputs
controlled by using macro commands or the status of partitions which are armed by
a macro command.
Show name
– if this option is enabled, the macro command name will be displayed.