SATEL INT-GSM
13
Password
– password for Internet GPRS connection.
DNS server
– IP address of DNS server to be used by the module. If the address has been
saved by the operator to the SIM card memory, you do not have to program it. Otherwise,
it is recommended that you program the IP address of the DNS server. The IP address is
necessary for sending data using GPRS technology, if the address of the device the
module is to connect to (monitoring station, computer with DLODX or GUARDX program,
INTEGRUM server) is entered as a name.
The GPRS parameters can be obtained from the GSM network operator.
Fig. 10. DLOADX program: “GSM phone” tab.
MCC/MNC code
– codes of the operator of GSM network to which the SIM card is to log in.
Enter in turn:
MCC (Mobile Country Code) – country code,
MNC (Mobile Network Code) – operator code.
Remember that entering invalid data may make logging into the GSM network impossible.
Unless you enter the code, the module will log into the available GSM network.
auto
– if this option is enabled and the module cannot log into the network of GSM operator
defined by means of the MCC/MNC code, it will log into the available GSM network.
SMS center number
– telephone number of the short message service center. It is used as
a connecting link when sending SMS messages. If the number has been saved by the
operator to the SIM card memory, it need not be programmed. Otherwise, if the module is
to send SMS messages, it must be entered. The number must be suitable for the operator
of network in which the SIM card is registered.