manualshive.com logo in svg

Satel INT-GSM, Manual, Page: 24 / 43

Share
Download
Satel INT-GSM Manual Download Page 24

22 INT-GSM 

SATEL 

SMS initiating update

 – the control command which, if sent in the SMS message, will start 

the firmware update. You can enter up to 8 alphanumeric characters (digits, letters and 
special characters). 

The command content must be different from that of the other control commands 
preprogrammed in the control panel. 

The module sends out an SMS notification on how the firmware update has 
proceeded. The notification is sent to the telephone from which the SMS message 
initiating the firmware download was received. 

5.3  User functions definition 

If the INTEGRA CONTROL application is used in the mobile device, the virtual keypad allows 
you to quickly start user functions after entering the code and pressing an arrow key. 
 

 

Fig. 16. DLOADX program: “User functions definition” tab. 

 

5.4  Virtual keypad 

The virtual keypad allows you to operate and program the alarm system in much the same 
way as using a physical keypad. You can use the virtual keypad in the DLOADX and 
GUARDX programs and in the mobile device (after installation of the INTEGRA CONTROL 
application). 
Parameters and options of the virtual keypad available in the DLOADX program can be 
programmed using: 

  DLOADX program: “Structure” window 

“Hardware” tab 

“Keypads” branch 

“DLOADX 

(RS-232)” item, 

 LCD keypad: 

S

ERVICE MODE 

S

TRUCTURE

 

H

ARDWARE 

LCD 

KEYPADS

 

S

ETTINGS

 

DLOADX

 

RS. 

Settings of the virtual keypad available in the GUARDX program or mobile device can be 
programmed using: 

  DLOADX program: “Structure” window 

“Hardware” tab 

“Keypads” branch 

[module 

name]

 

“GUARDX/ INTEGRA CONTROL” item (Fig. 17), 

Summary of Contents for INT-GSM












































Reviews:

No comments