SATEL INT-GSM
25
Fig. 18. DLOADX program: “Groups” tab.
5.5.2 Definitions
You can create and configure macro commands in the “Definitions” tab. The macro command
is a sequence of actions, composed of single commands, which are to be done by the control
panel when running the macro command.
New macro
– click to create a new macro command.
Remove macro
– click to delete selected macro command.
Name
– individual name of the macro command (up to 16 characters in two lines, up to 8
characters in the line).
Authorization required
– if this option is enabled, the macro command will only be run after
user additional authorization.
Disabl. if armed
– if this option is enabled, the macro command will not be available, when
any of the partitions operated by the virtual keypad is armed.
Autoexecute
– if this option is enabled, there is no need to enter the group to run the macro
command.