102
The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
1.
Hardware Version
- Lists the hardware versions of the clock.
2.
Software Version
- Lists the software version of the clock.
3.
Run Time From Last Power Up
- Lists the amount of time that has passed since the clock started
receiving power.
4.
Total Run Time
- Lists the total amount time that the clock has been powered since it was built.
5.
Reason for last restart
- Lists a code explaining the reason that the clock was restarted.
WDT - Watchdog Timer - Clock detected a software error and automatically restarted itself.
PowerUp - Power Cycle - The clock power source was reactivated after being removed by either the
user or a power outage.
6.
Last Received Signal at
- Lists the time and date when the clock last received NTP data.
7.
Network Sync Every
- Lists the number of hours that pass between each time that the clock powers
its transmitter to get NTP data.
8.
Worst Server
- Lists the number of the NTP server that has responded the least often when contacted
for NTP data. See “Web Interface - Servers” to see the server address/domain associated with each
number.
9.
Wi-Fi Signal Strength
- Lists the signal strength between the clock and wireless access point or
wireless router in dBm. The closer the number is to 0, the stronger the signal is.
10.
Battery Level
- Lists the remaining battery power in millivolts (mV).
11.
Hand Errors
- Lists the number of times that the internal diagnostics have reported an error resulting
from an improper motion of the clock hands.
12.
Troubleshooting
- Takes the user to the Troubleshooting page. On this page, the user can have the
clock check the hands for errors, set the hands to 12:00, or restore the clock to the factory default settings.
Web Interface - Diagnostics
1
3
5
7
2
4
6
8
10
9
11
12
