112
The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
Diagnostic Test #3 - Full Mechanical Test (ctd.)
While performing Diagnostic #3, an observer may
see the clock do the following actions:
1. The clock moves the second hand to 00
2. The clock moves the second hand around to
00 again, to verify that the hand arrived after
60 pulses.
3. The clock moves the minute and hour hands to
the next known position.
4. The clock moves the minute and hour hands
around to the same position, to verify that the
hands arrived after 720 pulses.
5. The clock moves the minute and hour hands to
12, so that the clock reads 12:00:00.
6. The clock tests frequency.
Pressing and holding the MECH SW and WIFI SW buttons simultaneously for ten seconds and then
releasing them will reset the clock to its manufacturing default settings. You will know that the command
was successful if the green LED turns on. All user-entered settings will be erased.
Restore Clock to Manufacturing Default
Red
Green
MECH SW
All Other Clocks
WIFI SW
