95
The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
Web Interface - Network Settings
1.
Clock Name
- This field allows the user to set a name used to identify the clock on the IP monitor. This
name is also used to identify the clock in a network list while the clock is in Direct-Connect mode. The
name must be fewer than 26 characters.
2.
Serial Number
- The clock’s serial number. It cannot be changed.
3.
MAC Address
- This field shows the clock’s permanent machine address. It cannot be changed.
4.
Network
- This field allows the user to connect the clock to a wireless network by entering the
network name (SSID).
5.
Network Password
- This field allows the user to connect the clock to a wireless network by entering
the network password. Network passwords must be 25 characters or fewer. The characters of the
password can be shown by placing the computer’s cursor over the word “show”
6.
DHCP Auto On
- Allows the user to set whether or not the clock will use a DHCP server to determine
the IP address for the clock.
7.
IP Address
- This field will display the clock’s IP address. If DHCP Auto On is enabled, this address will
be assigned by the DHCP server. If DHCP Auto On is disabled, then the user may set their own static IP
address.
8.
Subnet Mask
- This field allows the user to set the subnet mask for their clock. If DHCP Auto On is
enabled, this address will be assigned by the DHCP server. If DHCP Auto On is disabled, then the user may
set their own subnet mask.
1
3
5
7
2
4
6
8
