88
The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
Wi-Fi Monitor Software - Task Bar Options
1. Groups
- When clicked, this button will open the
Groups drop-down menu.
All - Clicking on this option will cause the monitor to display
all compatible IP devices on the network.
“Group Name” - Clicking on the name of a group will cause
the monitor to display all of the IP devices in that group.
Example: Clicking on “Group 1” will cause the monitor to
show only the devices that have been added to Group 1
through the Configure Groups menu.
Configure Groups - Opens the group configuration menu
(see below).
A. Text Boxes - Entering a name into the text box will change the name of the group. For example, the first text box currently
contains the name “Group 1”. This will cause the first group to be shown as “Group 1” in the drop-down menu.
B. Clocks buttons - Clicking on a Clocks button will display each of the group’s devices in the box to the right.
C. Device Box - Displays the devices for the selected group. The name of the selected group will appear above the device box.
To add a device to the group, click on a device on the Wi-Fi Monitor. While holding down the button on the mouse,
drag the name of the device over to the device box, then release the button on the mouse.
To remove a device from the group, click on a device in the device box. Whole holding down the button on the
mouse, drag the name of the device outside of the device box, then release the button on the mouse.
A
B
C
1
